Path: » Home » Locations » Ohio » Cleveland » Capabilities

Ohio

Steel Warehouse of Ohio
3193 Independence Road
Cleveland, OH 44105
Phone: 888-225-3760
Fax: 216-441-3103
Equipment ID Leveler Ohio Shear
SWCI ID LD W9
Gauge Minimum .125" .050"
Gauge Maximum .875" .375" (mild steel)
Entry Width Minimum 24" 4"
Entry Width Maximum 72" (M.E.) 144"
Entry I.D. Minimum 24"  
Entry I.D. Maximum 34"  
Entry O.D. Maximum 80"  
Entry Coil Wgt. Max. 80,000#  
Exit Width Minimum 24" 36" Back Gauge
Exit Width Maximum 72" (M.E.) 48"
Sheet Length Minimum 24" 6"
Sheet Length Maximum 480" (40 ft.) 240"
Stack Height Maximum   20"
Stack Weight Maximum   10,000#
Length Tolerance 32” - 144” (-0”/+ 1/16”)
145” – 300” (-0”/+ 1/8”)
300” – 720” (-0”/+ 1/4")
+/- 1/64"
Squareness Tolerance 32” – 144” (1/16”)
145” – 300” (1/8”)
1/32"
Camber 1/4" in 8ft  
Flatness
  • 1/8” in 8 ft for mild steel (up to 60,000 KSI)
  • 5/16” in 8 ft for high strength steel (60,000 KSI up to 80,000)
  • 7/16” in 8 ft for HSLA (100,000 KSI)
 
Steel Grades 1006/130,000 KSI 1008/980

Notes:

  1. Squareness is obtained by measuring the difference between the diagonals of the cut length. The deviation is one-half the difference. These tolerances are applicable only to slit-edge product.
  2. Flatness is measured as max deviation from a horizontal flat surface.
  3. Anything beyond the limits stated above, please inquire with Production Management.
Copyright © 2014 Steel Warehouse Co, LLC

B2A